Best LCD Display for Arduinos

We specially wrote this article on Best LCD Display for Arduinos to help you out. As you know there are many products available in different price range and features, it’s makes confuse to anyone while choosing best one. Hovever, if you’re in hurry this is the Best LCD Display for Arduinos on Amazon

We spent 43 hours to find a best option for you and it’s a UCTRONICS 0.96 Inch OLED, which comes with all amazing features you ever want. It is the Best LCD Display for Arduinos available in the market today. However, if you don’t want to spend big amount on LCD Display for Arduinos, then you should go with HiLetgo 2pcs HD44780 1602 which comes with all the basic options you could ever expect in LCD Display for Arduinos.

After a good research, we have sort listed Best LCD Display for Arduinos below.

Top 10 Best LCD Display for Arduinos In 2021

1 1


Check On Amazon
2 2

HiLetgo 2pcs HD44780 1602

Check On Amazon
3 3


Check On Amazon
4 4


Check On Amazon
5 5

MakerFocus 2pcs I2C OLED

Check On Amazon
6 6


Check On Amazon
7 7

kuman 3.5 inch TFT

Check On Amazon
8 8

RioRand LCD Module for

Check On Amazon
9 9

HiLetgo ILI9341 2.8 SPI

Check On Amazon
10 10

SunFounder IIC I2C TWI

Check On Amazon

Top 10 LCD Display for Arduinos

Are you looking for top 10 LCD Display for Arduinos available right now in the market? Then check out below, we researched and short listed best one here.




  • Resolution: 128 x 64, View angle: > 160°, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
  • Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
  • Needn’t backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable
  • No embedded fonts inside the OLED controller, user can create the fonts through the font generation software. We offer technical support and software library as well as the guide book in the package
  • 2. HiLetgo 2pcs HD44780 1602

    Introduction: As we all know, though LCD and some other displays greatly enrich the man-machine interaction, they share a common weakness.

    3. LGDehome IICI2CTWI LCD 1602

    Specification: Display: 2-lines x 16-characters Backlight: Blue with white character color Four Pin Definition:GND,VCC,SDA ,SCL Default I2C bus address:0x3F for PCF8574AT chip,0x27 for PCF8574T chip; Working Voltage:5V LCD controller: HD44780 Adjust Contrast:Potentiometer Adjust Backlight:Jumper Package Included: 2 pack blue 16×2 1602 lcd display + 2C serial interface 100% Satisfaction Guarantee 12-Month Warranty; Feel free to contact us if you don’t satisfied; We could also resent you new one for quality problem.


  • Default Address: 0x27 for PCF8574T chip;0x3F for PCF8574AT chip; Please kindlly check the chip of the i2c interface. ( Remember to download the LiquidCrystal_I2C library on GitHub before uploading the code to the control board)
  • How to wire: GND—GND; VCC—VCC; SDA—A4; SCL—A5
  • Compatibility: Fit for Arduino and Raspberry pi.Working Voltage: 5V ;Come with a potentiometer used to adjust backlight and contrast
  • Application:Used to display Characters, letters and Numbers ,real time clock, temperature, humidity,etc… ;
  • 4. IZOKEE 0.96” I2C IIC

    Tip: The blue and yellow areas are fixed and cannot be reset.


  • Due to the high resolution of 128 x 64 pixels, the display offers a lot of space to display elements!
  • Easy connection of the display with Arduino, Raspberry Pi, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.. Only through I2C interface via four pins!
  • The IIC address can be changed. Thanks to the standard driver chip (SSD 1306) libraries already exist for Arduino, Raspberry Pi and 51 Series, which makes programming very easy!
  • Tip: The blue and yellow areas are fixed and cannot be reset. The yellow area is the upper row, and the lower area is blue, as shown in the picture.
  • 5. MakerFocus 2pcs I2C OLED

    2pcs I2C OLED Display Module 0.


  • OLED display, no need backlight, self-illumination, Display Color: Blue. Plz note: These I2C OLED Display Module comes without pin headers.
  • The display performance is better than the traditional LCD display, also lower consumption; IIC (I2C communications) simplifies connections.
  • Use with Arduino, ESP8266, ESP32, STM32, etc; 3.35v Power; Operating temperature:-40 – 85 ℃; Resolution: 128 x 32.
  • We a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation!
  • 6. ELEGOO UNO R3 2.8


  • 2. 8 inches colorful display lcd screen
  • With touch pen inside, you can use it more easily
  • Not including the uno R3 controller board and usb cable
  • We have always cared about the customer experience and improve the product function details
  • 7. kuman 3.5 inch TFT


  • Compatible with Arduino Mega2560 development board directly, no any wiring needed.(SD card with 2560 is not supported)
  • 3.5 inch screen is designed for arduino board modules, 320*480 resolution, better display. No external power supply needed
  • we offer tutorial for beginners who would like to make projects via amazon.
  • High quality 3.5 inch touch screen with better price and good customer service.
  • 8. RioRand LCD Module for

    RioRand high-quality I2C LCD2004 display,a 4 line 20 character LCD module not only set the contrast control knob selector switch also has a backlight and IIC communication interface.


  • LCD module based on the popular HD44780 controller
  • Works great with Arduino and other micro-controllers
  • Tutorial/instructions can be found on manufacturer website.
  • 4 rows, 20 characters
  • 9. HiLetgo ILI9341 2.8 SPI

    Product Description:100% brand new and high qualityType: touch panelSize:2.


  • Resolution (dots): 240RGB*320Dots
  • Viewing Direction: 6 o’clock
  • Pixel arrangement: RGB vertical stripe
  • With PCB plate (including power supply IC, SD), compatible with 5110 interface
  • 10. SunFounder IIC I2C TWI


  • Support IIC protocol. The I2C LCD1602 library is provided, so you can call it directly.
  • With a potentiometer used to adjust backlight and contrast.
  • Power supply: +5V
  • Address of the module: ox27. SunFounder Wiki to learn more details:
  • Conclusion

    We did good research to find out top 10 Best LCD Display for Arduinos to buy in 2021. For more similar product reviews, check out below or visit here.